With the Hobo Rack, you can get even more out of your bike. Installation requires only a few screws and a few steps. You can find out how to do it here.
Place the Hobo Rack with the mounting points on the threaded eyelets on the head tube (A). Then insert the four mounting screws and tighten them to 6 Nm. Make sure the brake hose (C) runs between the frame and the rack.
If necessary, the outer cage can be dismantled. To do this, unscrew the mounting bolts (B) and remove the cage. To assemble the cage, insert the six mounting screws with washers and tighten them to 5 Nm.
ATTENTION!
When used with drop bars, only the Main Rack (small rack) may be used, without the outer cage. Otherwise, contact between the handlebars and the luggage rack could lead to accidents.
The maximum load of the front rack is 5 kg. Please ensure that the maximum system weight (120 kg) of the bicycle is not exceeded, even with a loaded front rack.
You can find additional safety instructions in the Hobo Rack manual.
Can't find what you're looking for? Additional support
