Speedlifter Classic T-10

The Speedlifter Classic from by,schulz is the solution for quick and easy handlebar height adjustment on your bike!
The T-10 version of the practical handlebar lift has an upward extension of up to 100 mm. This works within a matter of seconds and without any tools. Simply open the quick-release – pull up – close the quick-release – done!

Details:
• Version for threadless steel steerer tubes (!)
• Precise, tool-free height adjustment of the handlebar in just a few seconds thanks to the quick-release lever
• Safe, permanent anti-twist protection for the handlebar unit
• Individually adjustable in the stand without tools
• E-bike ready

Technical details:
• Material: 6061-T6 Aluminium
• For steerer tube material: Steel (!)
• Required steerer tube length: min. 46 mm above top edge of headset
• Pull-out height: 100 mm (T-10)
• For steerer tube outer Ø: 28.6 mm (1 1/8")
• For steerer tube inner Ø: 25.4 mm
• For stems with shaft clamp Ø: 28.6 mm (1 1/8")
• Height of the reduction sleeve (clamping surface for the stem): 39.5 mm
• Weight: approx. 325 g

In the box:
• 1 by,schulz Speedlifter Classic T-10

Note:
The steerer tube must be drilled and slotted for installation!
To mark the slots and holes on the steerer tube, we recommend the optionally available SimpleDraw tool (prod. code: 221689) or the Profi-Cut tool for professional use (prod. code: 199100).



Manufacturer: by,schulz GmbH, Bühler Straße 121, 66130 Saarbrücken, Germany, www.byschulz.com