Rose OSC Stem

The ROSE OSC (Optimal Stiffness Construction) stem combines low weight and maximum stiffness unlike hardly any other stem, because those are the attributes that ambitious racing cyclists look for. The winglet faceplate ensures optimum distribution of clamping forces as well as a reduction in sheer forces, which increases safety. The first-class workmanship and the stainless steel screws ensure long-term safety.
Attention: Approved for road bikes only!

• Handlebar clamp: Ø 31.8 mm
• Material: 3D forged aluminium 7050 T6
• Clamping height on fork shaft: 40 mm
• Screw-on 4-point handlebar clamp
• Angle: ±7°
• For threadless forks with outer shaft Ø 28.6 mm*
• Weight: approx. 100 g (100 mm)
• Supplied in length 60, 70, 80, 90, 100, 110, 120 or 130 mm
Please specify length!

• Category: 1 (please click on the button for more information)
The ROSE OSC stem may only be used on road bikes and only for the typical intended use of these bikes!

Tip:
*A steerer shim adapter (prod. code: 228261901) allows the use of stems originally designed to fit steerer tubes with an outer dimension of 28.6 mm (1 1/8“) on forks with a steerer tube outer dimension of 25.4 mm (1”). The slot of the shim should face to the front to prevent any damages to the steerer tube.


Manufacturer: Rose Bikes GmbH, Schersweide 4, 46395 Bocholt, Germany, www.rosebikes.de