Pletscher Comp 40 Flex light Rear Kickstand

Flexible, stable and lightweight. Thanks to the support shoe made of fibreglass-reinforced plastic, Pletscher was able to reduce the weight of the height-adjustable Comp 40 Flex light rear kickstand to a minimum. At the same time, the maximum load capacity has been retained: Your (e-)bike may weigh up to 50 kg. Thanks to the height adjustment in 7.5 mm increments, you can use the rear kickstand on bikes with a wheel size between 20" and 29". The only requirement is that your bike has a KSA mount with 40 mm bolt spacing.

Details:
• Weight-optimised rear kickstand for KSA 40 mounts (40 mm bolt spacing)
• Suitable for 20"-29" bikes thanks to height adjustment in 7.5 mm increments
• Low weight thanks to support shoe made of glass fibre reinforced plastic
• Integrated compression spring with end position damping for smooth folding and unfolding
• High load capacity enables use on bikes up to 50 kg

Technical details:
• Material: Aluminium, glass-fibre reinforced polyamide
• Compatible bike size: 20"-29"
• Strut length: 210 mm – 375 mm (adjustable in 7.5 mm increments)
• KSA mount: for 40 mm bolt spacing
• Max. load: 50 kg
• Weight: approx. 340 g

In the box:
• 1 Pletscher Comp 40 Flex light rear kickstand
• 2 hex bolts M6 x 20 mm (cylinder head)
• 2 hex bolts M6 x 16 mm (countersunk head)
• 2 hex bolts M6 x 35 mm (cylinder head)











Manufacturer: Pletscher AG, Obere Schilling 4, CH-8460 Mathalen, Switzerland, www.pletscher.ch
Responsible person: SES Sandmann, Rhebecke 1, 58091 Hagen, Germany, www.ses-sandmann.de