Maxxis Receptor [Gen.2] TR EXO HYPR-X Folding Gravel Tyre

The MAXXIS Receptor [Gen.2] is a gravel tyre with a focus on low rolling resistance and high efficiency on paved surfaces. The flat and dense centre tread enables particularly smooth and fast rolling behaviour on asphalt, while slightly pronounced side knobs provide additional lateral grip and traction on loose surfaces.

Thanks to its road-orientated tread design, the Receptor is particularly suitable for fast gravel use on mostly tarmac roads and firm surfaces. The construction is complemented by the revised hot-patch design.


Technologies:

• EXO PROTECTION
EXO Protection is an extremely cut- and abrasion-resistant protective layer on the sidewall of selected MTB, Gravel and Metro tyres from MAXXIS. The tightly woven material is designed to be both light and flexible, so that the performance of the tyres is affected as little as possible.

• HYPR-X Compound®
HYPR-X is a rubber compound which has been specially developed for gravel tyres by MAXXIS. It combines properties of the HYPR road tyre compound with elements of the MaxxSpeed MTB compound and is designed to reduce rolling resistance and improve cornering traction compared to the previous DUAL compound.

• TUBELESS READY [TR] 
In the MAXXIS range, Tubeless Ready [TR] refers to tyres with a construction that is designed for tubeless use with a sealant, a compatible tubeless rim or matching rim tape. The system enables lower air pressures and is intended to improve traction and ride quality, while reducing the rolling resistance. In addition, minor damages can be sealed directly by the sealant, which reduces the risk of breakdowns.


Technical details:
• Intended use: Gravel (asphalt, hardpack)
• Tyre type: clincher (folding tyre)
• Reflective stripes: No
• Tubeless capability: TR (tubeless ready)
• Casing: 120 TPI
• Puncture protection: EXO PROTECTION
• Rubber compound: HYPR-X Compound®

Dimensions:
ETRTO / Inch Size / French Size / Weight** / Tyre pressure / Maximum load / E-bike approval*: 
40-622 / 28 x 1.50”/ 700 x 40C / approx. 445 g / max. 5.2 bar (75 psi) / 75 kg / E25
*Note:
E-bike approval “no” = no e-bike approval.
E-bike approval "E-25" = approval for pedelecs up to 25 km/h pedal assistance.
E-bike approval "E-50" = approval for S-pedelecs and e-bikes up to 50 km/h subject to compulsory insurance (ECE-R75). 
**Attention:
The actual weights may vary depending on the colour variant.


In the box:
• 1 MAXXIS Receptor [Gen.2] TR EXO HYPR-X folding gravel tyre

Manufacturer: Cheng Shin Rubber Ind. Co. Ltd, Suite 800, 8F, 50, Sec.1,Shin-Sheng S.Rd, 100 Taipei, Taiwan, www.maxxis.com
Responsible person: Maxxis Europe B.V., Neutronenlaan 7, 5405 NG Uden, Netherlands, maxxis-europe.com