Maxxis Dissector [Gen.2] TR DD MaxxTerra MTB Folding Tyre

Fast direction changes, hard berms and rocky trails are the MAXXIS Dissector's [Gen.2] favourite terrain. The enlarged contact surface of the side and transition knobs builds up cornering grip early and thus provides a direct, safe riding experience.

The centre tread with adapted knob arrangement is designed for high braking control and better adaptation to the ground. Additional sipes throughout the tread support grip and control on dry, loose and rough trails, while the transition knobs positioned far to the outside support harmonious steering behaviour.

This makes the Dissector [Gen.2] suitable as a precise front tyre for down-country, trail and all-mountain bikes with short to medium suspension travel as well as a fast rear tyre for aggressive enduro set-ups on dry surfaces.

In this version, the Dissector [Gen.2] combines the particularly robust DoubleDown casing with the further developed MaxxTerra rubber compound for enduro and downhill use. The dual-ply casing combines high stability and increased puncture protection with a lower weight than classic downhill constructions, while the rubber compound offers high grip, efficient rolling behaviour and optimised mileage.


Technologies:

• DoubleDown Casing [DD]
DoubleDown is a tyre construction from MAXXIS with two 120-TPI casing plies and an additional butyl insert in the sidewalls. The construction is based on the MAXXIS downhill tyres with 60-TPI casing, but the finer casing plies and aramid bead cores are intended to save weight compared to classic downhill constructions. What’s more, the construction is more robust than EXO+ Protection and is designed for additional stability and increased puncture protection for tough enduro use.

• MaxxTerra
MaxxTerra is a single-compound rubber compound from MAXXIS for trail and enduro use. The consistent development of the proven 3C MaxxTerra compound is intended to offer more grip and a longer tread life while maintaining low rolling resistance. The compound thus combines efficient rolling behaviour with high traction on the trail.

• TUBELESS READY [TR]
In the MAXXIS range, Tubeless Ready [TR] refers to tyres with a construction that is designed for tubeless use with a sealant, a compatible tubeless rim or matching rim tape. The system enables lower air pressures and is intended to improve traction and ride quality, while reducing the rolling resistance. In addition, minor damages can be sealed directly by the sealant, which reduces the risk of breakdowns.

Technical details:
• Intended use: Enduro, Downhill
• Tyre type: clincher (folding tyre)
• Reflective stripes: No
• Tubeless capability: TR (tubeless ready)
• Casing: 2 x 120 TPI
• Puncture protection: DoubleDown Casing [DD]
• Rubber compound: MaxxTerra

Dimensions: ETRTO / Inch Size / French Size / Weight** / Tyre pressure / Maximum load / E-bike approval*:
61-622 / 29 x 2.40“ / ---- / approx. 1205 g / max. 3.4 bar (49 psi) / 90 kg / E50
*Note:
E-bike approval “no” = no e-bike approval.
E-bike approval "E-25" = approval for pedelecs up to 25 km/h pedal assistance.
E-bike approval "E-50" = approval for S-pedelecs and e-bikes up to 50 km/h subject to compulsory insurance (ECE-R75).
**Attention: The actual weights may vary depending on the colour variant.


In the box:
• 1 MAXXIS Dissector [Gen.2] TR DD MaxxTerra MTB folding tyre

Note: Image shows 3C MaxxTerra / EXO PROTECTION version.

Manufacturer: Cheng Shin Rubber Ind. Co. Ltd, Suite 800, 8F, 50, Sec.1,Shin-Sheng S.Rd, 100 Taipei, Taiwan, www.maxxis.com
Responsible person: Maxxis Europe B.V., Neutronenlaan 7, 5405 NG Uden, Netherlands, maxxis-europe.com