Vores ROSE online shop anvender cookies, for at forbedre din shopping oplevelse. Det gør det nemmere og mere behageligt for dig. Med fortsat brug af hjemmesiden, accepterer du brugen af cookies.
A puller with two two functions – with the Snap.in puller you can remove worn buttom bracket cups and or bearings. Simply squeeze the claws together a...
The universal chain tool Rohloff Revolver III fulfills the function of all previous chain breaking tools, including those for 10- and 11-speed chains....
After transport, repair works or a fall, rear derailleurs can be out of line, so that a precise alignment with the LINIENTREU tool is required. An imp...
The CRS-15.2 crown race setting system by Park Tool allows for a fast, easy and safe installation of crown races. The tool comes with two different in...
The outside surfaces of the crankset casing should be 100% flat, to support the bearing shells of the bottom bracket as much and as evenly as possible...
A complete tool set to work on Campagnolo Ultra-Torque™ and Power Torque™ crank and bottom bracket systems. The CBP-8 includes all the tools necessary...
Indispensable for Campagnolo 10-speed chains with HD link. Very precise, professional tool in Campagnolo quality.
· Not suitable for Perma Link
· Repl...
The CRS-1 crown race setter by Park Tool allows for a fast, easy and safe installation of the fork crown race. The CRS-1 set includes one universal se...
This thread cutting tool helps to get the threads in the crankset casing optimally coaxial. If they are not coaxial, the bearing gets stressed. It wil...
The Cyclus Tools repair tap reams out the damaged thread while cutting a larger thread (M16) at the same time. Then threaded inserts with a 9/16" inte...
A slightly bent rear dropout can happen very quickly. The derailleur hanger alignment tool by Birzman helps you straighten it again with a flick of th...
· cutter head for head tube conventional (External Cup (EC))
· milling depth: 15 mm
· to use in combination with item no. 2000819 and item no. 2000828...
The BDT-2 gauge by Park Tool is designed to help set the proper tension on most belt drive systems and sizes. A scale shows whether the tension needs...
Organizing your workbench is no rocket science. The T-Bar Rack by Birzman is a 9-part T-wrench set including an appropriate stand for storage. The des...
On the one hand, this tool helps you press the headset cups into the head tube. Moreover, you can use it in combination with the bushings from mountin...
When stem and front wheel are not parallel, the SPURTREU alignment tool will help you to perfectly line up the stem with your front wheel. It is often...
The IR-1.2 internal cable routing kit by Park Tool facilitates the installation of internally routed electric cables, wires and housings, as well as o...
DKK
€
€
£
€
€
€
SEK
€
€
€
€
€
CHF
