DKK
€
€
£
€
€
€
SEK
€
€
€
€
€
CHF
Rohloff splined sprocket
Rohloff also offers splined sprockets in addition to thread-on sprockets. These new sprockets are fixed on a plug pinion adapter (Splined-Carrier) tha...
Topkarakter!
Rohloff replacement sprocket for Speedhub
The 15-, 16-, and 17-tooth sprockets are reversible and can be used from both sides.
Topkarakter!
SHIMANO replacement sprocket for Nexus gear hubs
Sprocket, suitable for Shimano Nexus and Alfine gear hubs. · available with 16, 18, 19, 20, 21 or 22 teeth Please specify number of teeth!
Topkarakter!
Rohloff splined sprocket adapter
The splined sprocket adapter (Splined-Carrier) allows you to fit Rohloff splined sprockets to an existing Rohloff hub. Simply screw the adapter on to...
Topkarakter!
Rohloff "S" adapter for splined carrier
For special cases where you need more clearance, as e.g. the chain rubs against the chain case or chainstays, Rohloff offers this slim splined carreir...
Pitlock set 21 thru axle 15mm for Suntour MTB
To ensure the wheels of your beloved bicycles don't walk when parking your bike out of sight, the Pitlock set 21 thru axle for Suntour MTB forks prote...
SHIMANO Anti-rotation washers for rear opened dropouts
Shimano non-turn washers for dropouts with opening towards the rear. · 1 pair
SHIMANO Anti-rotation washers for horizontal dropouts
Shimano non-turn washers for horizontal dropouts. · 1 pair
Rohloff Chain Tensioner 8250
The Rohloff chain tensioner allows you to use Rohloff’s Speedhub on full-suspension bikes, as it keeps the chain at a suitable length so that the rear...
KUN FÅ TILBAGE!
Rohloff Lever Hood for Twist Shifter
Replacement lever hood by Rohloff for Rohloff’s twist shifter 8206. Details: · With special structure for good grip In the box: · 1x lever hood...
TILBUD
NuVinci magnet disc for N 360
Magnet disc, suitable for NuVinci N 360 gear hub. · Mounting on the right hub side Available in: · Black · Silver Manufacturer's ref.: Nuvinci3 (bl...
SHIMANO Dust cap right for ALfine SG-S700 without seal
Shimano dust cap for the right side of the Alfine SG-S700 11-speed gear hub. Details: · Suitable for SG-S700 · Right side · Type D · No seal · 1 piec...
KUN FÅ TILBAGE!
enviolo NUVINCI N330/N360/N380/N380SE CVP Hub Installation Kit
Kit to install Nuvinci and enviolo gear hubs. The kit includes: · 2x M10 acorn nuts · 2x lock washers · 1x hexagon nut · 1x washer 2 mm · 1x snap rin...
Rohloff Snap-Ring for Splined Sprockets
Spare snap-ring for securing Rohloff splined sprockets. Suitable for splined sprocket adapters for conversion from screw-on sprockets to splined sproc...
KUN FÅ TILBAGE!
Rohloff Monkey Bone IS to PM adapter 160 / 180 mm
The Monkey Bone by Rohloff replaces the combination of a SPEEDBONE adapter and a standard IS-PM adapter and thus makes it easier to use the Rohloff OE...
KUN FÅ TILBAGE!
Rohloff Speedbone
The Speedbone can be used as an alternative for the long torque support if the frame has a disc brake mount and a disc brake is mounted. (Attention! P...
KUN FÅ TILBAGE!
enviolo NUVINCI N330/N360/N380/N380 SE FREEHUB SPARE KIT NEW
Optimized spare kit for all Nuvinci/enviolo N330/N360/N380 hubs, including the following replacement parts: · Freehub body with three reinforced paw...
TILBUD
NuVinci /enviolo N330/N360/N380/N380 SE Freilauf Ersatzteilkit
Ersatzteilkit für alle Nuvinci/enviolo N330/N360/N380 Naben, bestehend aus folgenden Ersatzteilen: · Freilaufkörper mit drei Klinken und 61803 Rille...
KUN FÅ TILBAGE!
enviolo NUVINCI N360/N380/N380 SE HARMONY/H-SYNC HUB ENCODER
The Hub Encoder with 6 magnets takes up the movement of the hub and transfers it to the hub interface. · For N360/N380/N380 SE hubs · For both Harmon...