00 800 22 77 55 55
Man.-Fre. 08.00 - 18.30
Lørdag 09.00 -13.00
Klingebolte - reservedele
Pimp your bike!
With the lightweight and coloured chainring bolts from Reverse Components you can design your crank. The bolts are tightented with two...
Protects your bike's crank on rough trails: The Race Face Crank Boots can simply be pulled over the end piece of the crank, so that adverse terrain ca...
FC-4500 / 4503 / 4550 / R600 / R550 / R553
High-quality bottom bracket by Rotor for the installation of 30 mm crankset axles for BB30 standard on frames with BSA or Italian thread.
Replacement bearing kit with sealing rings for your Campagnolo Ultra Torque crankset.
· Suitable for all Campagnolo Ultra Torque cranksets (...
Required when using an Alfine or Nexus hub gear in connection with vertical dropouts, as long as no rear derailleur takes over the tensioning function...
ROTOR Press Fit 4130 bottom bracket with steel bearings and non-contact labyrinth seal. The latter ensures perfect protection from dust, water and dir...
Shimano chainring bolts for the small or large chainring of 5-arm Shimano Alfine, Tiagra, Sora and 105 series cranks.
· For Shimano chainrin...
Shimano crank fixing bolt suitable for:
· FC-M 610
· FC-M 617
· FC-M 770
· FC-M 771
· FC-M 582
Shimano chainring bolts to fasten the inner and - when using the FC-MT700 – the outer chainring.
· Suitable for SLX FC-M7000 (double and triple), XT F...
· M6x19 mm
· Incl. washer
· Suitable for the following cranksets:
KUN FÅ TILBAGE!
Shimano chainring bolts for middle and outer chainring.
· For SLX FC-M7000 triple cranksets
· Fits to mid and outer chainrings
· M8 x 8,5 mm
· 4 x sta...
· 8 mm steel hex screws
· for square bottom brackets
· 1 pair
· for carbon crankarms
· avoid subsequent damages at the crank when tightening the pedals
· 2 pieces
· manufacturer's ref.: 11.6700.002.010
Shimano chainring bolts to fix the inner and outer chainrings of the Shimano cranksets FC-R8000/FC-6800/FC-R9000/FC-R9100 and the inner chainring of...
Shimano chainring bolts for small or large chainrings of 5-arm Shimano Dura Ace and Ultegra cranks.
· For single or double chainrings
· M8 x...
The FSA crank bolt is suitable for V-Drive, Comet, Afterburner and Gossamer MegaExo cranks. The bolt comes with an M18 thread and is made from alumini...
Shimano crankset fixing bolt suitable for
· FC-U5000 Metrea
Replacement bearing kit with sealing rings for the Campagnolo Power Torque crankset of your bike.
· Suitable for all Power Ultra cranksets
Replacement bearing kit with sealing ring for the Campagnolo Super Record Ultra crankset of your bike.
· Suitable for all Super Record Ultra...