The high quality precision tool is a must-have for a secure mounting of attachment parts such as stems, handlebars, seat posts etc. With 2-24 Nm the ROSE torque wrench set covers a wide adjustment range and is ideal for assembly works on your bike. · incl. 3, 4, 5, 6, 8, 10 mm Allen key + star wrench T-20, T-25, T-30 · incl. 8 cm long 5 mm Allen key · easily switchable 1/4" drive · easily legible Nm scale with window · in practical hard shell box
Ideal for home and on the go! With this well-equipped tool box you can do almost all standard maintenance works on your bike. Contents: chainring bolt tool/wrench for integrated crank extractor, sprocket removal tool with 1/2" drive and 24 mm wrench opening incl. guide pin, Phillips screwdriver, small flat-blade screwdriver to adjust the rear derailleur, sprocket tool/remover (chain whip), for 7-/8-/9-/10-/11-speed, bottom bracket tool with 1/2" drive and 24 mm wrench opening for ISIS, Shimano square and Octalink bottom bracket, bottom bracket cup tool for Shimano Hollowtech II (for the installation/removal of SM-BBR60, BB-MT800 bottom bracket cups, you'll additionally need the adapter TL-FC25, item no.: 1995246; for the installation/removal of a SM-BB9000/BB93, you'll need the adapter TL-FC24, item no.: 1919121) and compatible bottom bracket cups, star cap tool for Hollowtech II cranksets, crank extractor for square, Octalink and ISIS cranks, spoke wrench with wrench opening: 3,2/3,3/3,5 mm, pedal key with 15 mm wrench opening and 14/15 mm socket, chain tool, suitable for 7-/8-/9-/10-speed chains and Shimano 11-speed with replacement pin and 9-speed replacement pin in the handle, 2 cone wrenches with wrench opening 13/14 and 15/16 mm, 2 plastic tyre levers in long version, repair kit, star wrench T-20/25/30 "L" shape, Allen key set with 2/2,5/3/4/5/6 mm, 4/5/6 with ball head, 8 mm Allen key with 1/2" adapter for tools with 1/2" drive.
This robust tool box offers a multitude of tools ambitious hobby mechanics need for road bike, MTB or trekking bike maintenance. A practical division into three sections and accurately fitting key compartments allow easy access to the required tools. Contains: Chainring bolt tool/key for integrated crank extractor, HG/IG sprocket removal tool with lever arm and guide pin, cross-head/slot-head screwdrivers, sprocket remover for 7-/8-/9-/10-/11-speed (chain whip), bottom bracket tool with lever arm for Shimano and similar cartridge bottom brackets, bottom bracket cup tool for Shimano Hollowtech II (not for BB-9000, SM-BB93, SM-BBR60) and similar bottom bracket cups, special tool for Shimano BB-M950 bottom brackets and chainrings of 4-arm cranks FC-M950, 951, 952, 750, 739, 570, 569, MC40, star cap tool for Hollowtech II cranks, crank extractor for square, Octalink and ISIS cranks with integrated hexagon socket wrench, 3 spoke wrenches with 3,3/3,4/3,5 mm wrench opening, chain tool suitable for 7-/8-/9-/10-speed chains and Shimano 11-speed, incl. spare pin, 8 cone wrenches with wrench opening: 2 x 13 mm, 2 x 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, open-end wrench 8 and 10 mm, open-end wrench 12 and 14 mm, double open-end wrench 15/16 mm + 15/17 mm, 2 headset wrenches 30/32 and 36/40 mm, hex key kit with ball head 1,5/2/ 2,5/3/4/5/6/8/10 mm, "L" shaped star wrench T-25, cable cutter for inner cables and cable casings, set with 3 plastic tyre levers, puncture repair kit, cleaning brush with claw, chain cleaner.
The name says it all. Due to its solid construction, the 2-Zent.A:-XL is designed for frequent use. With a weight of approx. 7,7 kg, it stands securely and safely on your workbench. It can also be firmly attached to the workbench by means of screws. With the help of the ergonomic knobs, you can clamp the hub and align the centering arms as well as the side arm. · clamping measure: max. 150 mm · material: steel · for 16"-29" wheels · check for vertical and lateral run-out possible · for thru axle hubs we recommend to use Shimano adapters TL-FH12/TL-HB16 (item no. 2001234/2001252) · base dimensions: W: 20,5 cm/L: 24,5 cm
Are you a passionate hobby mechanic or would you like to become one soon? Then the All2gether Pro Bike repair box is just the right thing for you. The comprehensive contents offer you a very good and varied equipment if you would like to work on diverse bike models. Thanks to the broad range of tools, you will be perfectly equipped for current standards and for older ones as well. The robust case can also be carried along comfortably on tours etc., a snap closure avoids unintended opening of the case and a loss of the tools. After using the tools, they can be neatly clicked into the prefabricated pockets. Contents: 1x chainring bolt tool with integrated nut wrench (9/10 mm) and 2-pin tool to mount/dismount integrated crank extractors (16.5 mm distance) 3x composite tyre levers with flexible metal core 1x chain whip to fit/remove the chain 1x nipple wrench (3.2mm/3.3mm/3.5mm/4.0mm) 1x cleaning brush 1x 15 mm pedal wrench 1x 8 mm hex wrench with ½” adapter for tools with ½” drive 1x chain wear indicator for 7-11-speed chains with ½” pitch 1x chain link pliers to open/join 8-/9-/10- and 11-speed chains with connecting link 1x cable cutter for cables and cable casings (not suitable for hydraulic brake cables) 1x crank cap tool for Shimano Hollowtech II cranks 1x Shimano/Sram HG/IG lockring removal tool with ½” drive or 24 mm open-end wrench 1x bottom bracket tool for Octalink, square and ISIS bottom brackets with internal gears, for 24 mm open-end wrenches or ½” ratchets 1x chain rivet extractor for 7-/8-/9-/10- and 11-speed chains 1x lockring removal tool for all 7-/8-/9-/10- and 11-speed cassettes, 17 mm box wrench and 2x15 mm pedal wrench 1x bottom bracket tool for Hollowtech II or similar, as well as for SM BB9000/SM-BB93 and SM-BBR60, BB-MT800 1x star wrench L set (T-10/T-15/T-20/T-25/T-27/T-30/T-40/T-45/T-50) 1x hex wrench L set (2 mm/2.5 mm/3 mm/4 mm/5 mm/6 mm) 1x slotted screwdriver 1x crank extractor for Octalink, square and ISIS bottom brackets 1x Pressfit removal tool for Shimano Pressfit BB86/92 and BB30 bearing cups 1x Pressfit fitting tool with threaded rod and press pistons for Shimano/Sram BB86/92 bearing cups and BB30/PF30 bearing cups 1x torque wrench 2-24 nm (1/4”), incl. 3/4/5/6/8/10 mm hex and star T-20/T-25/T-30, 5 mm hex extension (8 cm) Total weight: approx. 5250 g
The advantage of these tyre levers made of break-proof plastic is that they have broader and rounded edges. Tyres and rims are thus treated with care. A non-slip surface guarantees safe handling. · for dismounting, the levers can be hooked into the spokes · 3-piece set that can be stuck together for a tidy saddle bag and workplace
With the ROSE Pinpusher IV, you get a very robust chain tool that stands out for its functionality thanks to the use of tool steel, a rubberised handle and a long aluminium lever. An additional fixing device holds the chain ends together and allows riveting the chain when tensioned. · integrated pliers to open chain links · adjustable rivet pin depth · suitable for 7-/8-/9- and 11-speed chains · suitable for Shimano 10-speed chains · incl. replacement pin
The Nano TorqBar DX is an extremely compact and practical torque wrench. A precisely manufactured, high-quality tool for home mechanics, bike workshop or your own jersey or saddle bag. Especially suitable for high-tech carbon frames, components and electronic shifting systems, who need an exact tightening torque. Contains three preset TorqBits (4 Nm, 5 Nm, 6 Nm) and the 5 most common tool bits (3 mm/4 mm/5 mm/T20/T25). Moreover, you can store the two most important bits for fastest access and convenient transport in the handle of the TorqBar DX wrench. · 15 functions · switchable fine tooth ratchet · handle contains compartment for two tool bits · incl. transport case for the included star and tool bits · incl. TorqBits (4, 5 and 6 Nm) · incl. tool bits (hex 3, 4, 5 mm and star T20, T25) · material: tool: hardened steel housing: aluminium/fibreglass composite case: fibreglass composite · dimensions (L x W x H): 12 x 1,6 x 1,6 cm · weight: approx. 62 g (incl. one Torq and two tool bits) Manufacturer's ref. 154 200 83 / TT2570
This thread cutting tool helps to get the threads in the crankset casing optimally coaxial. If they are not coaxial, the bearing gets stressed. It will then run stiffly and wear out prematurely. · available for BSA or Italian thread (pair) Please specify thread type.
Such a tool is absolutely indispensable for the correct mounting of headsets, because inappropriate tools (e.g. hammers) often dam-age the sensitive bearing cups. This Cyclus high-quality tool offers the attributes of a professional tool, but remains affordable nevertheless. With ergonomic hand rests and a long lever for optimal power transmission. · with ball bearing · suitable for 1"/1 1/8" € 37,95 or 1 1/2" headsets € 43,95 Please specify size!
High-end centering device for daily workshop use or occasional use at home. Its large ground contact area gives the "2-Zent.A:" a secure hold on workbenches, tables or out and about in the boot of the car. Its torsional rigidity achieves a maximum level of accuracy and continuously variable quick adjustment makes adjustment to any hub width possible without any difficulty. The Xtreme "2-Zent.A:" is precise and easy to operate. Radial and lateral run-out can be centered at the same time. The variable folding mechanism makes it small and easy to transport. · suitable for wheels from 20"-29" · not suitable for wheels with 15 mm or 20 mm thru axle · for thru axle hubs we recommend to use Shimano adapters TL-FH12/TL-HB16 (item no. 2001234/2001252)
The ROSE truing stand is a robust steel construction for precise adjustment of the radial and lateral run-out. It provides a reliable basis for ensuring the concentricity of wheels. Its long foot extensions provide sufficient stability for it to be used as a mobile stand, without having to attach it to a workbench. The ROSE truing stand represents very good value for money. · suitable for wheels from 24"-29" · foldable · not suitable for wheels with 15 mm or 20 mm thru axle · for thru axle hubs we recommend to use Shimano adapters TL-FH12/TL-HB16 (item no. 2001234/2001252)
With this set you always have the right key at hand. The plastic-covered T-handle lies comfortably in the hand, and thanks to the one-sided ball heads you can also reach hard-to-reach areas. The practical metal stand ensures a clean look of your workshop. It stands alone and can be attached to the workbench or wall by means of the included fixing material. · long lever arm · incl. 2/2,5/3/4/5/6/8 hex keys and T-25 star screwdriver
The outside surfaces of the crankset casing should be 100% flat, to support the bearing shells of the bottom bracket as much and as evenly as possible. Only in this way can a correct and lastingly firm fit for the bearing be guaranteed. · suitable for BSA and Italian thread, 68, 70 and 73 mm case width