Batterier / Genopladelige batterier
Akku og batterier til cykelcomputere, GPS og navigation
The USB-Werk is connected to the hub dynamo and provides a voltage of 5 volts and a current of 500 mA. An integrated cache battery ensures that the voltage supply remains constantly at 5 volts, even when riding slowly or stopping. This makes it particularly suitable for mobile phones, GPS and MP3 players. Including: B+M USB Werk incl. plug contacts for Shimano/SON hub dynamo, connecting cable for hub dynamo, fixing materials and output cable with USB 2.0 socket Manufacturer's ref.: 361BW
For all those who want to use their mobile phones, GPS receivers, MP3 players and other electronic devices while cycling and for those who do not have a stationary charger available the "bike-mobile" E-Werk is made. When you connect this compact device to the hub dynamo which is generated by the rider’s performance ist than no longer used only for the lighting system, but can alternatively be used by the E-Werk. The energy is released via two included connection cables. You can attach the plugs you need to them. Alternatively, you can use the included USB cables as a standard connection for various products. This ensures that no device run out of energy while riding. There is a pin on the underside of the device, with two turning knobs for adjusting the voltage (2,8 up to 13,3 V) and strength of current (0,1 up to 1,5 A) quickly and for all common usages. The E-Werk supplies up to 16 W and has amazing o-load losses of only 0,03 W at 30 km/h! Even at a speed of 15 km/h, the E-Werk charges as fast as a standard mains charger. The E-Werk can also be operated via an e-bike battery or cigarette lighter with a direct current of 50 volts. · weight: approx. 53 g · incl. mounting material, connection cable for hub dynamo, cable with USB plug, cable with mini USB plug, cable with micro USB plug, 2 free cables for device-specific plugs, 1 plug for Shimano hub dynamo, 2 flat-pin plugs with shrink hose for SON hub dynamo
This battery pack gives your Garmin device some extra power. Especially useful for longer tours. Intelligent solution: The battery pack can either be charged directly in the device via the USB charger (item no. 2098504) or on the PC via the USB cable. Compatible Garmin devices: • GPSMAP® 64 • GPSMAP® 64s • GPSMAP® 64st • Oregon® 600 • Oregon® 600t • Oregon® 650 • Oregon® 650t • Oregon® 700 • Oregon® 750t Manufacturer's ref.: 010-11874-00
Connected between E-Werk and mobile device (e.g. mobile phone, GPS, MP3 player etc.), the backup battery can at the same time be charged and give off 5 V without fluctuating (standard for USB connections). This is necessary for some devices that cannot be powered or charged when the voltage they are fed with fluctuates or is interrupted. Devices that cannot be charged during operation can also be charged with the backup battery. The same goes for 4 serially connected NiMH batteries in an external battery case with an adequate output socket for circular plugs. The backup battery must be charged before a mobile device can be charged. · NiMH battery, capacity: 1400 mAH · input voltage: 5,6 V direct current, output voltage: 5 V direct current, max. 800 mA · incl. input cable with screw cap and circular plug (3,5 x 1,35 mm), output cable with socket for circular plug (3,5 x 1,35 mm) · LED charging display · incl. stowage bag (material: nylon) with velcro strap for fixing to the frame tube (up to a Ø of approx. 60 mm) Attention! Only suitable for devices with an input voltage of 5 V (direct voltage).