Klik Cykel Skærme
Our category Plug-in mudguards contains everything you need in order to equip your bike with mudguards subsequently. Protect yourself and your bike from dirt, which is swirled up by the tyres. Whether you own an all terrain bike (ATB), mountain bike (MTB) or race cycle – you will surely find the right mudguards for your bike here. A special highlight is the fact that only the bracket is fixed permanently at the bike. You can thus mount or remove the mudguards easily whenever you what.
High-quality 2-component dirt board for the rear wheel of mountain and trekking bikes. Whether you own a 26", 27,5", 28" or 29" bike, you will find the right X-BLADE in our range. Thanks to the quick-release attachment, the dirt board can be mounted on almost every seat post. Its 2-joint technology allows an optimal adjustment to the wheel. Suitable for tyre widths up to 2,4" and tube Ø 25-40 mm. · Available for wheel size 26"/27,5" (weight approx. 228 g) or wheel size 28"/29" (weight approx. 239 g) Please specify wheel size! Manufacturer's ref.: black 26+27,5": 11449 28+29" 11450 black/grey 26+27,5" 11096 28+29" 11101
High-quality 2-component front fender that attaches to the fork of mountain and trekking bikes. The clamping cone disappears almost invisibly into the steerer tube. · Incl. adapter, suitable for steerer inner Ø 15-35 mm · Suitable for tyre widths up to 2,4" · Available for wheel size 26"/27,5" (weight approx. 101 g) or wheel size 28"/29" (weight approx. 112 g) Please specify wheel size! Manufacturer's ref. black 26+27,5" 11451 28+29" 11452 black/grey 26+27,5" 11095 28+29" 11097
Topeak X11 MTB rear mudguard that matches the front mudguard XC1 (item no. 1809356). Quick release fastener for easy and precise attachment to the seat post (Ø 25,4-34,9 mm). · With 3 struts for precise angle adjustment · Material: die-cast nylon · Weight: approx. 202 g (XC11); approx. 202 g (XC11 27,5"); approx. 220 g (XC11 29") · Width: approx. 102 mm (suitable for a tyre width of up to 2,6") · Available in 26", 27,5" or 29"
The simple, two-joint quick-release fixing system can not only be mounted quickly, but also fits aero forks and frames. That's why the Raceblade Pro XL can be mounted on almost every road bike and can be adjusted ideally to the radius of the wheel with the length adjustment of the struts. The lightweight and extra long spoiler offers additional protection. · Wheel size 28“/700 C tyres up to 32 mm width · Tread width 32 mm · Weight approx. 365 g · Length front mudguard approx. 565 mm · Length rear mudguard approx. 730 mm · Manufacturer's ref.: black: 11322; silver: 11321; matt black: 11431
Bold looks and good protection! That is what a mountain biker wants and what the Dirt Blocker DH SL offers. Tool-free adjustment allows the mudguard to be adjusted optimally to the riding situation. · width: approx. 85 mm · suitable for 26-29" bikes with tyre width up to 2.25 (57 mm) · suitable for seat post Ø from 25-32 mm · tool-free height and angle adjustment via two joints · fast mounting and dismounting without tools · material: plastic (break-proof) · incl. fixing material
Bold looks and good protection! Not only for the rear wheel, but for the front wheel as well. The DH SL looks good and is incredibly stable. · width: approx. 80 mm · suitable for tyres up to 26-29" x 2.25 · suitable for shaft inner Ø 19-25 mm · fast mounting and dismounting · material: plastic (break-proof) · incl. fixing material
These mudguards (front + rear) are suitable for 28" trekking bikes and ATB bikes. The width of the plastic guards guarantees excellent dirt protection and enough space for running through up to a tyre width of 42 mm. · suitable for rigid and suspension forks** · suitable for 28" wheels · detachable
Its name already suggests its most important characteristic. The extra long Raceblade Long offers protection, whether you are riding your road bike in warm summer rain or on lonely winter tours. The end of the mudguard reaches until under the hub axle. This length spares you and people riding behind you from splash water. The Raceblade Long can be easily fitted to almost every road bike and can be ideally adjusted to the radius of the wheel, thanks to the length adjustment of the struts. The clip connections make sure the Raceblade Long can be quickly removed from the road bike, if it is not required. Only the discreet metal fixing loops remain on the bike. · wheel size 28“/700 x 18 - 25 C · weight approx. 493 g · length front mudguard approx. 525 + 150 mm · length rear mudguard approx. 805 + 150 mm · manufacturer's ref.: black: 11311, silver: 11310
Super slim mudguard set for road bikes. Clip and two straps for easy attachment to the fork; velcro straps for attaching the rear mudguard to the top and seat tube; angle-adjustable. Suitable for tyres up to 700 x 25 C Material: die-cast nylon Weight: approx. 39 g (RC1) approx. 98 g (RC11) Width: approx. 83 mm (RC1) approx. 58 mm (RC11)
The simple, two-joint quick-release fixing system can not only be mounted quickly, but also fits aero forks and frames. That's why the Raceblade Pro can be mounted on almost every road bike and can be adjusted ideally to the radius of the wheel with the length adjustment of the struts. The lightweight and extra long spoiler offers additional protection. · Wheel size 28“/700 C tyres up to 25 mm width · Tread width 25 mm · Weight approx. 335 g · Length front mudguard approx. 519 mm · Length rear mudguard approx. 680 mm · Manufacturer's ref.: black: 11319; silver: 11320; white: 11318; matt black: 11430
The Topeak MTB front mudguard that matches the Topeak XC11 rear mudguard (item no. 1809365). Quick release fastener to attach the mudguard to the fork (max. fork shaft inner diameter 35 mm). The fender can be dismantled into two parts for easy transport. Particularly robust yet lightweight construction. Additional flexible zones protect from dirt and increase durability. A polished underside offers good dirt resistance. · Material: die-cast nylon · Weight: approx. 190 g (26"); approx. 208 g (27,5"/29"); · Width: approx. 85 mm (suitable for a tyre width of up to 2,6") · Compatible with Manitou forks · Available in 26" or 27,5"/29" Manufacturer's ref.: 26" 15200061 / TC 9617, 27,5/29" 15200064 / TC 9639
It’s hard to be more puristic. The 1 mm thin piece made of robust plastic is so flexible that you can universally position it as a mudguard under the suspension fork bridge. The wing-shaped side parts are attached to the fork legs via cable ties. To attach the front part of the mudguard to the fork bridge, you can also use cable ties. The pass-through width depends on the used fork. · universal fixing, suitable for all fork models (except Lefty) · incl. 4 cable ties · length: approx. 26,5 cm · weight: approx. 33 g
Very wide mudguard that can be fixed to all standard forks and gives your mountain bike a radical look. Thanks to the intelligent fastening, the longer part of the mudguard can be mounted on the front or rear of the fork, depending on the fork type. · width: approx. 110 mm · suitable for tyres up to 26/29" x 2.4 · the extremely stable metal holder is fastened with an angular-contact cone in the lower opening of the fork stem (for Ø 19-25 mm) · suitable for suspension forks and rigid forks · material: plastic (break-proof) · incl. fixing material
Once it is mounted, you can easily fit and remove it quickly and at any time without tools. · Holder is attached behind the rear wheel brake (bridges a caliper depth of approx. 40 mm) · Suitable for road bikes with race brakes or corresponding drill holes · quick release · Width: approx. 45 mm