Cykel Dæk og slanger Tilbehør
Sealant with latex for tubeless tyre systems and preventive puncture protection for tube systems. · acts depending on the climate conditions for 2-7 months · thanks to antifreeze additive suitable for temperatures of up to -29°C · 473 ml version; 59 ml version in bottle with attachment (for filling a tyre approx. 60 ml depending on the size are required, for an optimal filling process, we recommend to use the Stan's NoTubes filling syringe, item no. 2010490) · filling via valve only possible, when the valve insert can be screwed out. · content: 59 ml € 4,95 (basic price 1 l € 83,90) · content: 473 ml € 14,95 (basic price 1 l € 31,61) Please specify content!
Easily convert your tubeless ready components into a tubeless tyre system. The Slime Pro sealant offers effective protection from punctures of up to 3 mm. The string Gorilla tape forms a robust basis for the rim base. Tyre levers, tubeless valves and CO² inflators with cartridges for tyres of up to 29" are included. As a CO² cartridge offers a high volume of air, the tyre jumps better into the rim bead. Features of sealant: · Suitable for temperatures ranging from -37°C to 82°C · Non-corrosive, non-toxic · Lasts up to 6 months and longer · Can be filled in via the valve shaft or directly into the tyre · Suitable for Schrader, Dunlop, Presta valves (valve insert must be removable) · Required quantity per tyre: road tyre approx. 45 ml, cross country tyre approx. 60 ml, downhill tyre approx. 90 ml Features of rim tape: · Width: 25,4 mm (The tape should be at least 3 mm wider than the inner rim width. You can also cut the tape to length if need be.) · Sufficient for 4 rims Features of CO² inflator: · Dispensing head suitable for Presta and Schrader valves · 2 x 20 g threaded cartridges suitable for 29" tyres (Note: For a separate attachment to the bike, we recommend you to use the Genuine Innvovations X-Mount bracket, item no. 2230827.) Including: sealant (content: 237 ml), measuring cup, 2 x tubeless Presta valves, valve extractor, Microflate Nano CO² inflator, 2 x 20 g CO² cartridge, inflation adapter from SV/DV to AV, 1 roll of Gorilla rim tape, 2 x tyre levers Attention! Not suitable to convert tyres and rims into a tubeless system that are not tubeless ready. Manufacturer's ref. 50086
Required for an airtight seal at the valve opening, when a standard road rim with NoTubes rim tape is to be prepared for use with tubeless tyres. · for valve drill hole up to max. Ø 8 mm · unscrewable valve insert · also suitable for: Stan’s NoTubes ZTR rims and Campagnolo 2-Way Fit wheels, DT Swiss Tricon wheels, Fulcrum 2-Way Fit wheels, Shimano Tubeless wheels · length: 44 mm · incl. valve cap · 1 pair Attention! Use tubeless compatible tyres!
Your practical tubeless conversion kit for standard tyres and rims. Reduces weight - and avoids annoying changing of inner tubes. You can ride with a pleasantly low air pressure, which enhances grip and traction significantly. Details: • Reduces weight and rolling resistance - and you can ride with a low air pressure of 2 bars (without a higher risk of a damaged rim) • More grip and shock-absorption with less air pressure • Environmentally friendly and latex-free sealant with micro-sealing particles, makes the tyres self-sealing for approx. 6 months • Suitable for punctures of up to Ø6mm Technical data: • Suitable for Presta valve • Suitable for MTB tyres from 26-29 inches • Suitable for the following rim widths: 17-19 mm (inside), 19-25 mm (inside) • For standard hollow chamber rims • Weight: approx. 50 g (17-19 mm), approx. 70 g (19-25 mm) per inner tube with valve Included: • 1 set for 2 tyres • 240 ml Tubeless Sealant for holes up to 6 mm • Double-sided adhesive tape • 2 x rim tapes with Presta valve and valve cap • Valve extractor, spare valve, pumping adapter from Presta to Schrader, 2 connecting tube pieces for filling Manufacturer's ref.: 519460 (19-25 mm), 519461 (17-19 mm)
- top repair spray for on the go - · Damages in the inner tube are repaired by the latex foam, thanks to the fact that the latex component "vulcanises" automatically and seals the damage. · It is possible to inflate a clincher tyre up to 6 bar or a tubular tyre up to 6,5 bar. This pressure can be increased afterwards with a hand pump. · Protection for several weeks! The latex dries in only after a few weeks, which means that it helps avoid further damages in that time. · Universal spraying head! Suitable for Presta, Schrader and Dunlop valves. · incl. practical holder, suitable for tube Ø 26,0-31,8 mm · content: 75 ml (sufficient for repairing one tyre/inner tube) (Basic price 1 l € 125,33)
Easy, fast, clean. If you don't want to wait long when you have a puncture, simply roughen the surface of your inner tube and/or tyre and apply the Skabs. Then just refit the inner tube, pump it up and continue cycling. · no drying time needed · suitable for inner tubes or the inside of tyres · Ø approx. 25 mm · contents: 6 patches, 1 sandpaper Manufacturer's ref.: 20053
The affordable solution to build a tubeless tyre system out of standard hook-bead rims and a tyre. The inner tube is removed and replaced by a rubber seal stripe with integrated valve. Together with the included sealing liquid, an airtight tubeless tyre system, that also provides preventive protection from punctures, is realised. The advantages of a tubeless tyre systems are above all a lower rolling resistance, more comfort and improved grop and control of the bike. · incl. 2 x rubber seal stripes with integrated Presta valve (length: 36 mm, unscrewable valve inserts), self-adhesive rim tape (replaces the existing rim tape when necessary for height adjustment or serves as additional underlay to ensure that the real rubber seal stripe fits perfectly under the rim flange), 473 ml sealing liquid with latex (for filling approx. 60 ml per tyre depending on the size are required), dosing attachment and tilt cup (for an optimal filling process, we recommend to use the Stan's NoTubes filling syringe, item no. 2010490) · suitable for 29" hook-bead rims with an outer width of 21,5-25 mm Attention! To mount the rubber seal stripes and tyres, plastic tyre levers are required.
Effectively seals punctures in tubeless tyres up to a size of 3 mm. The Slime Pro Tubeless sealant is directly transported to a new puncture. The pressure of the escaping air pushes the Fibro-Seal particles of the sealant into the hole where it creates a flexible and durable plug. No more air is lost and a puncture is effectively prevented. · Suitable for temperatures ranging from -37°C to 82°C · Non-corrosive, non-toxic · Lasts up to 6 months and longer · Can also be pumped up with CO² · Can be filled in via the valve shaft or directly into the tyre · Suitable for Schrader, Dunlop, Presta valves (valve insert must be removable) · Required quantity per tyre: road tyre approx. 45 ml, cross country tyre approx. 60 ml, downhill tyre approx. 90 ml · Incl. measuring cup · Content: 237 ml (Basic price 1 l € 58,86) Manufacturer's ref.: 10160SL
A clean and easy solution to fill a tubeless tyre system or a tube via a valve with sealing liquid. · brass screw adapter suitable for Schrader and Presta valves · Volume: approx. 60 ml · incl. boring tool for Schrader valve inserts Attention! Filling only possible for valves with unscrewable valve inserts.
Schwalbe's glue for tubular tyres allows you to secure tubular tyres to rims. · Also suitable for carbon rims · Brush integrated into lid for easy application (in 180 g tin) · Content: 90 g tube, sufficient for two rims (basic price 1 kg € 87,78) · Content: 180 g tin, sufficient for four rims (basic price 1 kg € 66,11) Manufacturer's ref. 3713 (90 g), 3708 (180 g)