MonkeyLink Monkey Fender Set MTB RECHARGE with Rechargeable Rear Light

Thanks to MonkeyLink, your mountain bike can be transformed into an everyday vehicle in just a few simple steps. With the complete MonkeyLink plug-in fender set for the pre-equipped ML connection, both wheel protection and rear lighting are securely fastened with just one motion.

With the RECHARGE bike protection set, a rechargeable rear light is already integrated in the rear fender. Combine it with a rechargeable ML-Light Front RECHARGE headlight with the appropriate lighting power (separately available, see prod. code 2268374) to get a complete lighting set. Every component can easily find its place via the magnetic connection and locks in place, all on its own. The rear light can then be easily detached when it needs to be recharged via USB port, and re-attached afterwards.

With the MonkeyLink system, you have all the options for equipping your MTB with splash protection and safety attachments. You have full flexibility to decide whether you want to ride with a fender, lighting or both.

Details:
• MTB fender set with integrated rear lighting for the MonkeyLink system
• Can be easily removed or mounted thanks to the self-locking magnetic system
• Suitable for all common MTB tyre sizes
• Includes rechargeable, integrated rear light (RECHARGE)
• StVZO-approved for all types of bikes

The MonkeyLink system allows you to mount bike accessories, such as lights or mudguards, to your bike with a flick of the wrist, thanks to a universal mount. The system is specifically designed for bikes without a power supply (RECHARGE) or e-bikes (CONNECT). Magnetic connectors allow for easy installation. One connection – countless possibilities.

Attention:
As some bike manufacturers fit their bikes with the MonkeyLink system as a standard, the fender set is supplied without fastening material.
For the rear fender, you will need a saddle clamp holder (prod. code 2268388 or 226838) and the MonkeyLink Interface Bike RECHARGE for the back (prod. code 2281136), which is screwed into the holder.

If you also want to mount a MonkeyLink RECHARGE headlight, you will need the front MonkeyLink Interface Bike RECHARGE (prod. code 2281175) and either the MonkeyLink ML-Handlebar Clamp (prod. code 2268392) or a MonkeyLink compatible stem (such as prod. code 2268383).

Fender technical details:
• Material: plastic
• Compatible tyre sizes: 26“, 27.5“, 28“, 29“
• Compatible tyre width: max. 3”
• Fender length: 684 mm (rear), 616 mm (front)
• Weight: 490 g (set incl. rear light)

Rear light technical details:
• Material: plastic
• Installation: MonkeyLink mount
• Lamp: LED
• Battery type: integrated lithium-ion battery
• Battery indicator: Yes
• Burn time: approx. 7 hours
• Lateral beam angle: approx. 220°
• Light modes: 1 (permanent light)
• USB socket: micro-USB
• Protection rating: IPX4 (protection against spray water from all sides)
• Dimensions: approx. 80 mm x 86 mm x 26 mm
• Weight: approx. 44 g

In the box:
• 1 MonkeyLink Monkey Fender Set MTB RECHARGE with battery-powered rear light



Tip:
If you want to ride at night without fenders, you can simply insert an optional, rechargeable MonkeyLink rear light into the ML saddle clamp instead (such as prod. code 2268378).
 





Manufacturer: eurorad Deutschland GmbH , Longericher Straße 2, 50739 Köln, Germany, www.monkey-link.com/