Bosch Kiox 400C Bike Computer for Smart System (BRC3200)

The Bosch Kiox 400C display is the ideal upgrade for your e-bike with Bosch Smart System and system controller integrated in the frame. The replacement is done in a few simple steps and you have a fully-fledged display in the top tube that provides you with riding data, system information and route navigation via the eBike Flow app. On compatible bikes such as the Slab Plus, you can even use the integrated USB-C port to charge your devices – simply with power from your e-bike battery.

The prerequisite for installation is a top tube with an extended cut-out – externally recognisable by the fact that the smaller system controller sits in a separate plastic housing. The Kiox 400C display, on the other hand, is mounted directly in the frame without a housing and can then be paired with your e-bike via the eBike Flow app. If you already have a Mini Remote on your handlebar, you can reset it and then also pair it with the Kiox 400C. Even an additional handlebar display such as the Kiox 300, Kiox 500 or Smartphone Grip is possible with the appropriate cabling. 


Highlights: 

INTEGRATED AND PROTECTED
The Kiox 400C is inconspicuously integrated into the frame and permanently installed in the top tube. This means it is optimally protected from bumps and impacts – even on fast-paced downhill rides.

BRILLIANT COLOUR DISPLAY
A particularly bright 1,000 cd/m² displays the information on the Kiox 400C in razor-sharp colour. Thanks to the sensor, the brightness automatically adjusts to the ambient light.

DYNAMIC DISPLAY
The Kiox 400C always shows you exactly the information you need – depending on whether you are riding uphill, downhill or on the flat. 

LET YOURSELF BE NAVIGATED
If you start the navigation in the eBike Flow app, your Kiox 400C will automatically take over the route and guide you visually and with additional audio instructions.

CHARGING DEVICES VIA USB-C*
The integrated USB-C charging port turns your e-bike into a power bank. Simply recharge your smartphone or battery lights – even while riding.

MAKE YOUR DISPLAY UNIQUE
Customise the display of the Kiox 400C in the eBike Flow app to suit your preferences. With over 30 adjustment options, you decide what you see on your display while riding

*Note: 
Please find out in advance from the manufacturer or specialist dealer of your e-bike whether your model supports the charging function via the USB-C port.


Details:
• Top tube bike computer for compatible e-bikes with Bosch Smart System
• As an upgrade option for the Bosch System Controller (note frame compatibility)
• For displaying, recording and synchronising trip, fitness and system data
• Navigation function with track display and turn-by-turn directions via Bosch eBike Flow App
• Controllable via three buttons or Bluetooth handlebar control unit "Mini Remote" (NOT included)
• Power supply via cable connection to the e-bike on-board network
• USB-C port for charging external devices, e.g. smartphone (see note above)
• Dust and splash-proof housing

Technical details:
• Intended use: e-bike
• Model: BRC3200
• Display: transmissive colour display
• Display size: 2 inch
• Touchscreen: No
• Buttons: 3 (operation also possible via handlebar control unit "Mini Remote", not included)
• Installation: Direct Mount (in compatible frames)
• Battery: Power supply via the electrical system, internal Li-Ion battery 3.7 V / 75 mAh
• Interfaces: 1 connection for BCH3611 display cable (rear), 1 USB-C (front)
• Radio protocol: Bluetooth (BLE 5.0)
• Ride data: yes
• Gear change recommendation indicator: yes
• Navigation: Track display*, visual and acoustic turn-by-turn directions
• Map display: Base map (road network)
• GPS: no
• Activity recording: yes*
• Fitness tracking: yes*
• Compatible with Bosch eBike Lock: yes
• Compatible with Bosch eBike ABS: yes
• Protection category: IP55 (protected from dust and spray water)
• Temperature range: -5 °C to +40 °C (operation) / +10 °C to +40 °C (storage) / 0° to +40° (charging)
• Charging current USB-C port: max. 2 A
• Output voltage USB-C port: 5 V
• Software updates: via eBike Flow smartphone app*
• App compatibility: Android from version 8.0, iOs from version 16.0
• Dimensions: approx. 44 × 86 × 20 mm
• Weight: approx. 57 g

* Note:
Only in conjunction with a smartphone connected via Bluetooth and the eBike Flow app.

In the box:
• 1 Kiox 400C Display BRC3200
• 1 EB1320009N mounting bolt
• 1 manual and installation instructions


Assembly instructions:
• Only use the supplied mounting screw to mount the Kiox 400C.
• If the eBike Lock function is activated, it must be deactivated in the Flow app before replacing the display. After pairing with the Kiox 400C, you can reactivate it. 
 

Manufacturer: Robert Bosch GmbH, Robert-Bosch-Platz 1, 70839 Gerlingen-Schillerhöhe, Germany, www.bosch-ebike.com