SKU
49321700
Abstract Product Id
2574
Concrete Product Id
7494

Cyclus Tools milling tool for crankset casing

Varenummer: 49321700

The outside surfaces of the crankset casing should be 100% flat, to support the bearing shells of the bottom bracket as much and as evenly as possible... Yderligere information

Leveringstid 2 dage

Før 180,30 € 114,50 

Pris inkl. moms
plus 0,00 € levering til Danmark

Du er godt på vej til at købe standardmodellen.
Din konfiguration er ikke gemt.
Ønsker du at gøre cykeln til din helt personlige cykel, klik her.

klik her.

Eller ønsker du at fortsætte med at købe standardmodellen?

Specifikationer

The outside surfaces of the crankset casing should be 100% flat, to support the bearing shells of the bottom bracket as much and as evenly as possible. Only in this way can a correct and lastingly firm fit for the bearing be guaranteed.
· suitable for BSA and Italian thread, 68, 70 and 73 mm case width

Anmeldelser
(5)
(3)
(0)
(1)
(0)

(9)

Kun brugere, som er logget ind, og som har købt varen, kan lave en anmeldelse. Log ind og skriv din anmeldelse.

milling tool for crankset casing

Farve: 
Standard
Størrelse:
Standard

Pros: Well made sturdy tool and good quality sharp cutter, not too expensive.

Cons: The guide bush on the cutter side is not threaded and is a loose fit in the bottom bracket shell. This makes the cutter chatter and leaves radial marks. I cut a strip of tin of the right thickness (0.2mm) and the right length so that the ends did not overlap when wrapped round the guide bush. With my packer wrapped round the guide bush the tool worked perfectly. Cyclo could provide shims of different thicknesses.

Also no instructions but this video is useful: https://www.youtube.com/watch?v=so7naC-fq_Q

milling tool for crankset casing

Farve: 
Standard
Størrelse:
Standard

Pros: Well made sturdy tool and good quality sharp cutter, not too expensive.

Cons: The guide bush on the cutter side is not threaded and is a loose fit in the bottom bracket shell. This makes the cutter chatter and leaves radial marks. I cut a strip of tin of the right thickness (0.2mm) and the right length so that the ends did not overlap when wrapped round the guide bush. With my packer wrapped round the guide bush the tool worked perfectly. Cyclo could provide shims of different thicknesses.

Also no instructions but this video is useful: https://www.youtube.com/watch?v=so7naC-fq_Q

milling tool for crankset casing

Farve: 
Standard
Størrelse:
Standard

sehr robust, schneidet sauber, alles top

milling tool for crankset casing

Farve: 
Standard
Størrelse:
Standard

Klasse, um den Sitz und damit die Lebensdauer von Shimano HT-II-Lagern zu verbessern!

milling tool for crankset casing

Farve: 
Standard
Størrelse:
Standard

Leider weist die Führung der Spindel ein zu großes Lagerspiel auf, als dass ein exaktes (paralleles) Planfräsen der Lagersitze überhaupt möglich wäre. Ich habe das Werkzeug daher lieber zurückgegeben und mich für ein präziseres (und leider teureres) Modell von Park Tool entschieden.

milling tool for crankset casing

Farve: 
Standard
Størrelse:
Standard

Tolles Preis/Leistungsverhältnis

milling tool for crankset casing

Farve: 
Standard
Størrelse:
Standard

Er bestaan betere gereedschappen doch de prijs daarvan zijn enkele veelvouden van deze. Goed en universeel gebruik.

milling tool for crankset casing

Farve: 
Standard
Størrelse:
Standard

Habe Innenlagergehäuse gekürzt und plangefräst, mit Schneidöl Verwendung gute und saubere Planflächen. Die Werkzeugwelle ist 15,8 mm im Durchmesser, daher auch für mein gewindeloses KLEIN Rad Innenlagergehäuse gut zu verwenden gewesen, exakte Arbeit möglich und durchgeführt.

milling tool for crankset casing

Farve: 
Standard
Størrelse:
Standard

finktioniert einfach, präzise und wirkungsvoll