Vis produkter
GRATIS returservice Håndbyggede cykler fra Tyskland Dansk kundeservice

    Zipp 808 NSW Carbon Clincher 28"/700 C road rear wheel 2016

    Vejl. pris før 12.151,90 dkk
    10.551,15 dkk
    Basispris: 0,00 dkk /

    Zipp 808 NSW Carbon Clincher 28"/700 C road rear wheel 2016 28"/700C

    se på prisen



    Zipp 808 NSW wheels are the result of more than 40 concept studies regarding aerodynamics, supported by CFD software and numerous wind tunnel tests. A rim height of 82 mm lets the tyres literally cut throught the wind, while reducing air circulations that could affect your speed. The concept is supported by extraordinary Cognition hubs that distribute acceleration forces over the hub flange, which makes them extremely robust. Moreover, the Showstopper technology where ilicon carbide is added into the surface resin of the rim flange offers safety as well as best braking power modulation and efficiency in adverse weather conditions.
    Demanding triathletes, time triallists and road cyclists will benefit from the Zipp 808 NSW wheels, as they are a weapon against time and wind.

    · ImPress technology: Graphics are not sticked, but printed – in this way, the circular depressions in the rim flange and their function to reduce air circulation remain unaffected
    · Showstopper technology: Adds silicon carbide into the surface resin of the rim flange for best braking performance even in adverse weather conditions
    · ABLC Sawtooth technology: In addition to the depressions in the rim flange, a sawtooth profile in the rim flanges reduces air circulations and thus deceleration. The aerodynamic balances between wind and downwind side is optimized, which inreases crosswinds stability.
    · Cognition hub: robust hub design which distributes the forces over the hub flange to reduce the stresses put on the bearings
    · Spokes: 24 Sapim CX-Ray aero spokes, lacing: 2-cross, Sapim Secure Lock nipples
    · Carbon rim for clincher tyres
    · Rim width: approx. 27,8 mm/height: approx. 82 mm
    · ETRTO: 622 x 17 C
    · For Presta valve
    · Compatible with 8-/9-/10-/11-speed Shimano/SRAM
    · Weight: approx. 980 g
    · Hub width: 130 mm
    · Note: As the rim flanges are made of carbon, you must only use brake pads for carbon rims.
    · Incl. titanium quick release skewers, butyl inner tube (700 x 19 - 25 C, valve length 37 mm), valve extension (length: 60 mm), valve remover, rim tape (width: 20 mm), brake pads comaptible with Shimano/SRAM carbon rims, wheel bag
    · Max. weight of rider: 113 kg
    · Max. system weight 120 kg (cyclist, bike, gear and luggage)

    Manufacturer's ref. 00.1918.297.000


    Shimano/compatible with Shimano/SRAM

    Alle produkter af mærket Zipp

    vis mere

    Spørgsmål fra kunder

    Har du et spørgsmål til varen?



    Denne vare er anmeldt 1 gange.

    5 stjerner
    4 stjerner
    3 stjerner
    2 stjerner
    1 stjerne

    Du kan kun anmelde et produkt når du er logged ind og hvis du har købt denne vare. Venligst log ind for at anmelde varen.
    Zipp 808 NSW Carbon Clincher 28"/700 C road rear wheel 2016 5
    af Gyula Hóbor
    (skrevet på 03.09.2017) 2017-09-03
    {gekaufter_artikel}: /
    (0 af 1 Kunde fandt denne anmeldelse hjælpsom)
    Könnyű, erős, áramvonalas és jól fogja a fék...
    Variant 28"/700C

    ikke tilgængelig

    Variant 28"/700C

    ikke tilgængelig

    Zipp 808 NSW Carbon Clincher 28"/700 C road rear wheel 2016

    carbon carbon
    Varen er på lager