Vis produkter
En måneds GRATIS returret Håndbyggede cykler fra Tyskland Dansk kundeservice

    Zipp 404 NSW Carbon Clincher 28"/700 C road front wheel 2016

    Vejl. pris før 8.941,88 dkk
    8.602,16 dkk
    Basispris: 0,00 dkk /

    Zipp 404 NSW Carbon Clincher 28"/700 C road front wheel 2016 28"/700C

    se på prisen



    Zipp 404 NSW wheels – developed for demanding road cyclists, triathletes and time triallists and with perfect values with regards to aerodynamics, braking performance and stability in crosswinds.
    The combination of wind tunnel tests and advanced CFD software resulted in a system that is robust enough for spring classics, yet light enough for sprints – and with perfect aerodynamics even in crosswinds.
    The Zipp 404 NSW wheels aim at making you faster, whether on climbs in the mountains or on flat terrain.
    The advanced Showstopper technology helps you reduce your speed when you have to – a rim flange with a silicon carbide surface that offers best braking power and braking power modulation whatever the weather or the length of the descent.

    · ImPress technology: Graphics are not sticked, but printed – in this way, the circular depressions in the rim flange and their function to reduce air circulation remain unaffected
    · Showstopper technology: Adds silicon carbide into the surface resin of the rim flange for best braking performance even in adverse weather conditions
    · ABLC Sawtooth technology: In addition to the depressions in the rim flange, a sawtooth profile in the rim flanges reduces air circulations and thus deceleration. The aerodynamic balances between wind and downwind side is optimized, which inreases crosswinds stability.
    · Cognition hub: robust hub design which distributes the forces over the hub flange to reduce the stresses put on the bearings
    · Spokes: 18 Sapim CX-Ray aero spokes, radial lacing, Sapim Secure Lock nipples
    · Carbon rim for clincher tyres
    · Rim width: approx. 27,8 mm/height: approx. 58 mm
    · ETRTO: 622 x 17 C
    · For Presta valve
    · Weight: approx. 705 g
    · Hub width: 100 mm
    · Note: As the rim flanges are made of carbon, you must only use brake pads for carbon rims.
    · Incl. titanium quick release skewers, butyl inner tube (700 x 19 - 25 C, valve length 37 mm), valve extension (length: 45 mm), valve remover, rim tape (width: 20 mm), brake pads comaptible with Shimano/SRAM carbon rims, wheel bag
    · Max. weight of rider: 113 kg
    · Max. system weight 120 kg (cyclist, bike, gear and luggage)

    Manufacturer's ref. 00.1918.300.000

    Alle produkter af mærket Zipp

    vis mere

    Spørgsmål fra kunder

    Har du et spørgsmål til varen?



    Denne vare er endnu ikke blevet anmeldt.

    5 stjerner
    4 stjerner
    3 stjerner
    2 stjerner
    1 stjerne

    Du kan kun anmelde et produkt når du er logged ind og hvis du har købt denne vare. Venligst log ind for at anmelde varen.
    Variant 28"/700C

    ikke tilgængelig

    Variant 28"/700C

    ikke tilgængelig

    Zipp 404 NSW Carbon Clincher 28"/700 C road front wheel 2016

    carbon carbon
    Varen er på lager, kun tilgængelig i begrænsede mængder